Steel Door Installation Tips: Do’s and Don’ts
News & Events
Steel doors are one of the best innovations in the construction field. Whether it’s your house, office or shop, steel doors provide you with strength, security and elegance. With proper installation and maintenance, steel doors can last decades even in extreme weather and also are available in a wide variety of designs which can totally complement your interior. That’s why Fusim steel doors in Kerala and India are taking the limelight.
Another convenience is that anyone can install a Fusim steel door with proper instructions and careful attention. Because the installation process really matters to ensure the functionality and longevity of the door. If you are a homeowner and a DIY enthusiast, you can install your doors yourself. But a single mistake can result in incorrect installation affecting its durability and endurance. Even builders and construction workers can make these mistakes if they are not experienced enough.
Don’t worry, let’s just break down the correct methods for installing a steel door, step by step.
But before the process, make sure you have all the tools and materials you need.
- Measuring Tape – measure the height and width of the door frame to avoid fitting errors.
- Spirit Level – to ensure the frame and door is correctly placed
- Pencil – to mark the measurements
- Screwdriver or Power Drill – to screw and fix the frame and hinges
- Screws and anchors – to secure the door and door frame
- Shims – small wooden or plastic pieces to help balance the door as they fill the gaps between the frame and the wall.
- Foam or Sealant – to fill the empty spaces around the frame as it blocks air, moisture and noise from entering
Now, let’s get to work.
- Measurements
Measure the space within the wall where the door frame will be secured (the rough opening), measure the door frame. The rough opening should be larger than the frame’s overall dimensions. Add about 1 inch to the width and ½ inch to the height of the frame. It is recommended to do a test fit to ensure if the frame aligns properly within the opening.
- Position the Steel Door
Place the door into the frame. Make sure the door sits straight with the use of a spirit level and closes properly.
- Secure the frame
Ensure the wall frame is clean and mark the hinge spots. Properly secure the door frame inside the wall frame using shims to balance it from both sides. Anchor the frame to the wall with screws to prevent movement and ensure stability. Also, use a level to verify the vertical alignment.
- Seal the Gaps
Apply foam or sealant around the frame to fill any gap. Let the sealant dry fully and install any necessary trim or finishes.
With these simple steps you can also become an expert at installing doors and avoid common mistakes. Always make sure all the tools and materials you use including the screws, plugs, hinges, sealant etc. are of top quality and rust proof.
With Fusim steel doors you don’t need to worry about the quality, they are strong, hard wearing, resilient and long lasting. Fusim steel doors are powered by Kehon Technologies and we have years of experience. We provide professional support for your steel door installation and we always recommend experts to deal with this.
For any help or doubts, feel free to connect with our expert team.
